Support

(800) 567-7401

service@atlas-sys.com

 

Ares Customization Keys

This page lists all the keys and tables shown in the Ares Customization Manager.

Icon

Values marked with a * can be used in print and email templates.

 

Contact Info | System | User Authentication | Web | Web Status Lines

Contact Info

General

*GeneralAddress1

Address Line 1 of general institution contact information.

*GeneralAddress2

Address Line 2 of general institution contact information.

*GeneralCity

City of general institution contact information.

*GeneralContact

Name (of user or department) for general institution contact information.

*GeneralEmailAddress

Email address of general institution contact information.

*GeneralPhone

Phone number of general institution contact information.

*GeneralState

State/Province of general institution contact information.

*GeneralZip

Postal code of general institution contact information.

*InstitutionName

Name of your institution.

*SystemURL

The URL for the Ares web interface.

Reserves Dept

*ReservesAddress1

Address Line 1 of reserves department contact information.
*ReservesAddress2Address Line2 of reserves department contact information.
*ReservesCityCity of reserves department contact information.
*ReservesContact

Name (of user or department) for reserves department contact information.

Icon
Removed from seed scripts for the Ares Customization table with version 4.7. Default templates now use EmailFromName. Will not be removed from existing installations of past releases of Ares.
*ReservesEmailAddress

Email address of reserves department contact information.  

Icon
Removed from seed scripts for the Ares Customization table with version 4.7. Default templates now use EmailFromAddress. Will not be removed from existing installations of past releases of Ares.
*ReservesPhonePhone number of reserves department contact information.
*ReservesStateState/Province of reserves department contact information.
*ReservesZipPostal code of reserves department contact information.

System

Batch Item Uploading

BatchUploadProcessingIntervalHow often, in minutes, the System Manager should check for batch item uploads to process.
UploadItemsPathThe location the staff client should use when looking for files to upload when performing batch item uploads. This can be a local path, a mapped drive or a UNC path.

Call Number Searching

CallNumberRequiredSetting this to Yes will require that a value is put in the Call Number field before sending the item to Awaiting Stacks Searching for printing call slips.

Client Upload

ClientUploadFTPPasswordIf using ClientUploadMethod of FTP, the password for FTPing to the web server.
ClientUploadFTPPathIf using ClientUploadMethod of FTP, the path to the AresDocs folder when FTPing to the web server.
ClientUploadFTPServerIf using ClientUploadMethod of FTP, the FTP server used.
ClientUploadFTPUsernameIf using ClientUploadMethod of FTP, the username for FTPing to the web server.
ClientUploadMethodMethod used for staff clients to upload files to the server. This value is either Share (for a file share) or FTP.
ClientUploadShareIf using ClientUploadMethod of Share, the UNC base path or mapped driver of Ares uploaded files on the web server. This value is ignored if using a ClientUploadMethod of FTP.

Cloning

CloneItemNotesWhen cloning items, this key determines whether or not to copy their notes.
CloneItemsRequireUsageWhen choosing items to be cloned, items must be used this many times to qualify for selection. 0 will allow all items to be cloned, regardless of usage.
AwaitingCopyrightProcessingMatchStringA string that will be appended to the SQL query used to determine which items require copyright processing.
CCCAnnualAcademicLicenseeIndicates if you are currently a licensee of CCC's Annual Academic License
CCCDefaultNumPagesThe number of pages used to request quick price from CCC if the item does not specify a page count.
CCCECCGatewayURIThe URI for the CCC ECC Gateway,  used exclusively on the web.
CCCECCGatewayURLThe URL for the CCC ECC Gateway,  used exclusively on the web.
CCCHomepageThe URL for the CCC Home Page button on the copyright form. This is only used when clicking the advanced search arrow on the copyright search ribbon in the client.
CCCPasswordCCC password for order related actions. Note that only submitting orders requires a login as all quick price lookups are anonymous.
CCCStatusUpdateEnabledAllow the System Manager to update CCC copyright items.
CCCStatusUpdateRunNowSetting this key to Yes will force System Manager to run an off-schedule CCC status update within one minute, after which this key will be reset to No.
CCCStatusUpdateRunTimeThe time of day System Manager will perform its daily CCC status update.
CCCUsernameCCC username for order related actions. Note that only submitting orders requires a login as all quick price lookups are anonymous.
CentralCopyrightProcessingIf set to Yes, copyright processing will be for all items regardless of processing location. Otherwise, each processing location sees only their items within the Awaiting Copyright Processing form.
CopyrightAlertFeeReducedFlag items to show when copyright fees have been reduced (via the daily CCC status update run).
CopyrightAlertGrantedFlag items to show when those on special order from CCC have been granted permissions.
CopyrightCourseStudentsThis will determine how copyright should be calculated based on the number of students in the course. Enrolled Students is equivalent to the number of students enrolled based on input by faculty/staff. Ares Students is equivalent to the number of students that have access to the course.
CopyrightDefaultStudentsIf the number of students has not been entered for a course and the CopyrightCourseStudents value is Enrolled Students or the number of students is zero, Ares will use this number for CCC quick pricing and ordering.
CopyrightMethodThe method you use to track reserves copyright. CCC = You use the the Copyright Clearance Center to secure Copyright. Alternate Provider = You secure copyright from some other source. None = The library does not secure copyright for reserves materials.
CopyrightPermissionDocFTPPathIf using ClientUploadMethod of FTP, the path to the Copyright Permissions document folder when FTPing to the web server.
CopyrightPermissionDocShareIf using ClientUploadMethod of Share, the UNC path to upload copyright permission documents.
CopyrightQuerySpecifies the SQL query used to determine a resource's reserves history on the Process Copyright form. If this is blank, a default query will be used.
RequireCopyrightClonedItemsDetermines how copyright requirements for cloned items will be handled. "Always" will always require copyright for cloned items. "Copy" will copy whatever value that the source item had for CopyrightRequired. "Never" will never require copyright for cloned items.

Course and User Loads

AutoClearPreregisteredUsersIndicates if users that are added from the UserValidation table and/or through the web service (your course management system) are automatically cleared.
CourseCreationEnabledIf this key is set to yes, when the Course and User load process runs, courses which do not already exist will be created from data in the CourseValidation table. The instructor specified in the CourseUserValidation table will be assigned as the instructor. If the specified instructor does not exist, a placeholder ValidationUser will be specified as the instructor for that course.
CourseUserLoadDataEncryptedIf this key is set to yes, Ares will decrypt the course and user load files. This should only be enabled if you are uploading encrypted files using the public key that Ares created.
CourseUserLoadDataFileCleanupBeginning with version 4.7, if this key is set to yes, the System Manager can remove course & user data files after processing has completed successfully. If any part of the course user loading and management fails, the files will not be removed.
CourseUserLoadEnabledIf this key is set to yes, when the Course and User load process runs, System Manager will parse the validation text files and insert them into the validation tables.
CourseUserLoadKeyPassphraseThis key is set automatically when a new key is created for encrypting course and user data loads.
CourseUserLoadReportEmailAddressEmail address to send daily reports to regarding the Course and User load process. Leave this value blank if you do not want the reports to be sent.
CourseUserLoadRunNowSetting this key to Yes will force System Manager to run an off-schedule course user load and management within one minute, after which this key will be reset to No.
CourseUserLoadRunTimeA comma-separated list of the times of day System Manager will perform its course and user load and management.
CourseUserLoadStatusIndicates if the System Manager is loading or managing course enrollment data. This value is read only.
CourseUserManagementEnabledIf this key is set to yes, when the Course and User load process runs, courses and their enrollments will be updated based on validation data.
CourseUserValidation TableThis table contains the following columns: Registrar Course Id, Library ID, User Type
CourseUserValidationDataPathIndicates the local path on the server where course and user validation text files are placed for loading.
CourseValidation TableThis table contains the following columns: Registrar Course Id, External Course Id, Name, Course Code, Description, URL, Semester, Start Date, Stop Date, Department, Instructor, Course Number, Course Password, Max Copyright, Default Pickup Site, Course Enrollment
RemoveMissingCourseInstructorsWhen managing course enrollment data, should Ares remove current instructors if they are not in the Enrollment Data?
UpdateCourseEnrollmentWhen managing course enrollment data, should Ares update the course enrollment number based on the number of students in the enrollment data?
UserCreationEnabledIf this key is set to yes, when the Course and User load process runs, users will be created from data in the UserValidation table.
UserValidation TableThis table contains the following columns: Library ID, Username, Last Name, First Name, Address1, Address2, Address3, City, State, Zip, Department, Status, Email Address, Phone1, Phone2, User Type, Clear Text Password, Password Hint, Cleared, Expiration Date, Trusted, Auth Method, Course Email Default, External User Id, User Info 1, User Info 2, User Info 3, User Info 4, User Info 5

Email

AcqAdvisementEmailEmail address for sending requests to Acquisitions for item purchase.
EmailFromAddressYour reserve department email address. This is used as the ReplyTo address when sending emails from the system. Note that all emails originate from the Ares web server where the System Manager service runs.
EmailFromAddressInstructorYour reserve department email address. This is used as the ReplyTo address when sending emails from the system to instructors. Note that all emails originate from the Ares web server where the System Manager service runs.
EmailFromAddressRightsholderYour reserve department email address. This is used as the ReplyTo address when sending emails from the system to rightsholders. Note that all emails originate from the Ares web server where the System Manager service runs.
EmailFromNameYour reserve department name for outgoing emails. Note that all emails originate from the Ares web server where the System Manager service runs.
EmailFromNameInstructorYour reserve department name for outgoing emails to instructors. Note that all emails originate from the Ares web server where the System Manager service runs.
EmailFromNameRightsholderYour reserve department name for outgoing emails to rightsholders. Note that all emails originate from the Ares web server where the System Manager service runs.
EmailPasswordThe SMTP password for sending emails from the system. Note that all emails originate from the Ares web server where the System Manager service runs.
EMailRouting Table

Email Routing is a tool that allows you to use email templates in Ares to standardize communications between Reserves staff and Ares users while simultaneously routing items to the appropriate status. The Email Routing table contains any routing rules you have created for your Ares workflow. See Configuring Email Routing for further information.

This table contains the following columns: ERouting Name, Email Template, Default Status

EmailSendingIntervalHow often, in minutes, the System Manager should check for pending emails to send. Note that all emails originate from the Ares web server where the System Manager service runs.
EmailSMTPPortThe SMTP port used for sending emails from the system. Note that all emails originate from the Ares web server where the System Manager service runs.
EmailSMTPServer

The SMTP server name for sending emails from the system. Note that all emails originate from the Ares web server where the System Manager service runs.

EmailUsernameThe SMTP username for sending emails from the system. Note that all emails originate from the Ares web server where the System Manager service runs.
ReviewAcqAdviseEmailShould Reserve staff review and edit Acquisition Advisement emails before they are sent to the Acqusitions department?
SSLSMTPSet to Yes to enable SSL when sending emails

General

AnonymousUsageStatisticsIndividual item usage statistics can be gathered anonymously or show the user accessing the document. This key controls how those statistics are kept. Note that if you choose anonymous usage stats, the users who click on items in Ares are not logged anywhere, only that someone clicked it.
CancellationReasons Table

This table holds the cancellation reasons and notes that appear in the Item form and in the ItemCancellation email, if sent. The reason for disavowal that displays on the user form and in the DisavowUser email template is also here. See Configuring Cancellation Reasons for more information.

CustomDropDown Table

This table holds the default dropdown fields that display on the web pages and forms within the client. See CustomDropDown Table for more information and for a list of default values.

Customization Table

The Customization table contains customization keys and values that have been added in various other tables in the Customization Manager. it is also used to add certain keys that may need to be created such as custom keys for configuring user request limits.

CustomQueues Table

The CustomQueues table contains any custom queues you have created for your workflow processing. See Creating Custom Queues & Creating Custom Flags for further information.

This table contains the following columns: Queue Name, Is Flag, Can Clone.

DocumentTypes Table

The DocumentTypes table contains a list of all acceptable file formats that Instructors can upload to Ares. See DocumentTypes Table for more information and for a list of default values.

LoanPeriods Table

Loan Periods indicate the length of time that a physical reserve item will be available to users accessing the item from the Reserves desk. This table contains the default loan period as well as any custom loan periods you have added. See Configuring Loan Periods for further information.

Routing Table

Routing Rules are logic statements in Ares that can be used to automatically move items from one status to another if the logic statement that applies is True. This table contains the routing rules you have created for your workflow processes. See Creating Routing Rules for further information.

SystemManagerAddonIntervalThe interval at which the System Manager should execute server addon scripts.

Integration

APIConfig TableThis table contains the following columns: ID, APIKEY, BaseAPIUrl, Description
LTIConsumers TableThis table contains the following columns: Consumer Key, Shared Secret, Instructor Roles, Ares Web URL
LTIFieldMappings TableThis table contains the following columns: Ares Field Name, Ares Object Name, LTI Field Name
WebServiceAgents TableThis table contains the following columns: Agent

Item Cleanup

ItemActivationPendingProcessingIntervalHow often, in minutes, the System Manager should check for items pending activation that should be made available.
ItemCleanupEnabledAllow the System Manager to cleanup expired items. This key works in conjunction with ItemFileCleanupDelete to determine what happens to expired items.
ItemCleanupRunNowSetting this key to Yes will force System Manager to run an off-schedule item cleanup within one minute, after which this key will be reset to No.
ItemCleanupRunTimeThe time of day System Manager will perform its daily item cleanup.
ItemFileCleanupDeleteSetting this key to Yes causes the System Manager to delete the files of items which have passed their inactive date.
ItemFileCleanupGraceDaysNumber of days to wait past the item's inactive date before deleting based on the ItemFileCleanupDelete setting.
ItemOrphanFileCleanupEnabledAllow the System Manager to cleanup orphaned files. If this is enabled the System Manager will clean up orphaned files every day at the specified time in the ItemOrphanFileCleanupRunTime key. Orphaned files are files that have been removed from the Items table but still have an entry in the ElectronicFiles table.
ItemOrphanFileCleanupRunNowSetting this key to Yes will force System Manager to run an off-schedule orphan file cleanup within one minute, after which this key will be reset to No.
ItemOrphanFileCleanupRunTimeThe time of day System Manager will perform its daily orphaned item cleanup.

Link Checker

LinkCheckerEnabledDo you want the System Manager to automatically perform link checking each night?
LinkCheckerHTTPCodeSuccessComma-separated list of HTTP Codes that represent a successful link check.
LinkCheckerIgnoreDomainsComma-separated list of domains that Ares should ignore when the link checker processes
LinkCheckerNewLinksOnlySetting this to Yes will cause LinkChecker to check only new, modified, or failed item links when it runs.
LinkCheckerRunNowSetting this key to Yes will force System Manager to run an off-schedule link check within one minute, after which this key will be reset to No.
LinkCheckerRunTimeThe time of day System Manager will perform its daily link check.
LinkCheckerTimeoutTimeout in seconds to wait for a response from a site when link checking.

Printing

CopyrightPermissionRequestDocFilename of the Word document used to generate copyright permission letters.
PrintDocumentsPathFile path for Word document templates. If left blank, the client will default to using the documents in the print directory of wherever Ares is running.
PrintItemDocThe filename of the Microsoft Word document to use when printing an item
StacksPrintDocWord Doc used for printing pull slips.

Sites

DefaultPickupSiteIf a pickup site is not defined when creating or verifying items, the default pickup site and its corresponding processing location will be reset to this site code.
Sites Table

This table, located in the Sites section of the Customization Manager, contains the processing sites for your institution and the pickup locations you will use for physical items. See Configuring Processing Sites and Pickup Locations for further information.

Staff Client

AddonDirectoryAddons are used from each staff workstation but can be synced/downloaded from a central directory. This value is the location of that directory on your local network. It can be a mapped drive (e.g. X:\ares\addons\) or a UNC path (e.g. \\localserver\ares\addons\).
RequirePasswordOnStaffSwitchDetermines if staff are required to re-enter their username and password when switching between logged in accounts in the client.
SharedCustomSearchesPathThe directory the client should check for saved custom search files. Typically this would be a mapped drive or UNC Path.

Tags

PurgeStudentTagsShould personal tags be purged from Ares at the end of a semester?

Version Information

VersionClientThe client version you should be using. This key is automatically updated when you obtain a new version of the client. This value is read only.
VersionCustomizationManagerThe Customization Manager version you should be using. This key is automatically updated when you obtain a new version of the customization manager. This value is read only.
VersionDLLThe web DLL version you should be using. This key is automatically updated when you obtain a new version of the dll. This value is read only.
VersionStaffManagerThe Staff Manager version you should be using. This key is automatically updated when you obtain a new version of staff manager. This value is read only.
VersionSystemManagerThe System Manager version you should be using. This key is automatically updated when you obtain a new version of system manager. This value is read only.

User Authentication

General

AuthenticationMethodThe default method for authentication users to the Ares System.

LDAP

CustomAuthNewAccountThe custom html file to redirect to when a new LDAP account is created. Leave this value blank to send newly created users to the default Change User Information page.
LDAPBindStyleValid values are OneStep or TwoStep authentication.
LDAPInitialBindDNThe initial LDAP bind used for TwoStep authentication. This is in combination with LDAPInitialBindPassword and allows access to search the LDAP directory.
LDAPInitialBindPasswordThe initial LDAP bind's password used for TwoStep authentication. This is in combination with LDAPInitialBindDN and allows access to search the LDAP directory.
LDAPSearchFilterOnly used for TwoStep authentication. Determines the user's DN from the UserID given on the login form. For Active Directory, this value is typically (sAMAccountName=$uid).
LDAPSearchPrefixFor OneStep authentication, this is the LDAP search prefix (before the username provided at login).
LDAPSearchScopeValid values are Base, One, and SubTree. Most sites use SubTree.
LDAPSearchSuffixFor OneStep authentication, this is the LDAP search sufffix (after the username provided at login). For TwoStep authentication, it determines the directory to search. This value can have multiple suffixes separated by | characters.
LDAPSecureSSLTurn on LDAP Secure SSL option (only if using LDAP authentication). The Ares DLL is looking for the key LDAPServerPort to determine what port number to use. If it isn't defined, the value of LDAPSecureSSL is taken into consideration to toggle between 636 and 389.
LDAPServerNameLDAP Server Name/IP
LDAPServerPortLDAP Server Port Number
LDAPVersionLDAP Version

RemoteAuth

RemoteAuthSupportIf enabled, your Ares dll will use remote authentication services. Remote authentication requires additional setup by that service (Shibboleth, CAS, CoSign, etc.).
RemoteAuthUserVariableThe HTTP Server Variable that Ares can look at to identify the user. The default is HTTP_REMOTE_USER
RemoteAuthWebPathThe local web path for the directory controlled by remote authentication. Only used if RemoteAuthSupport is set to Yes.

UserValidation

EnableUserValidationNewUsersIndicates if the User Validation tables should be used to populate the user record when authenticating non-registered users. Valid for LDAP and Remote Auth configurations.

Web

Alerts

CancellationAlertMessageAlert message displayed to user on web when cancelling an item. The cancellation alert only goes to the instructor for that course.
InstructorAlertAwaitingClearanceAlert that is displayed to a user who registers as an instructor but is awaiting staff clearance.
UseInstructorAlertAwaitingClearanceToggles whether to send the InstructorAlertAwaitingClearance alert to a newly registered instructor.

Default Values

WebDefaultCityDefault city when a user registers.
WebDefaultDepartmentDefault department when a user registers.
WebDefaultStateDefault state when a user registers.
WebDefaultStatusGroupDefault status when a user registers
WebDefaultZipDefault zip code when a user registers
WebInstructorSwitchUserModeHTML for switching to user mode when logged into the web as an instructor.
WebUserSwitchInstructorModeHTML for switching back to instructor mode when logged in as an instructor but viewing in student mode.

General

StaffProxyWebURLAres URL used for staff proxies logging into the web as an instructor. This is typically needed if using RemoteAuth because that web folder is protected.

Item Modification Options

WebEditAfterProcess

If set to No, edits on an Item will be limited after staff has processed the request. If set to No, use the WebStatusAllowEdit customization key to specify the statuses that allow editing.

WebStatusAllowEditA list of comma separated statuses where Instructors may edit items on the website. This key is used in combination with WebEditAfterProcess. Items with a status that matches this key may be edited after they have been processed even if WebEditAfterProcess is set to No.

Labels

WebFormValues TableThe WebFormValues table is not used in Ares. It will be removed from the Customization Manager in a future version of Ares.

MessageBoard

MessageBoardNewThreadRedirectAfter posting a new thread, users can be redirected to either the thread they just created or the course message board.

OpenURL

OpenURLDestinations

If a site has placed values in the OpenURLDestinations table, they can send a request from the client to any external system to be filled, including ILLiad, via OpenURL.

This table contains the following columns: Destination, Destination URL, Destination Status

OpenURLMapping

The OpenURLMapping table is pre-seeded with a setup that should work with most default OpenURL systems. If you need to change the behavior of how OpenURL interprets certain fields or genres, this is where you can make those changes.

The OpenURLMapping table consists of the following columns: ID, URL_Ver, rfr_id, Ares Action, Ares Field Name, Open URL Field Values, Ares Value

OpenWorldcat

WorldcatISBNPrefixThe prefix that is used for creating ISBN links to OpenWorldcat
WorldcatISSNPrefix The prefix that is used for creating ISSN links to OpenWorldcat

Paths

AresDocPathThe relative URL to Ares documents on the webserver. Typically this is a value of docs/ so that the URL would be something like https://your.server.name/ares/docs/ for the directory that contains reserve items.
AresPhysicalDocPath Physical location of Ares documents for the web server. This allows you to store the Ares items on another physical drive of the web server from where the web directory is and use a virtual directory to map to it.
TempUploadPathTemporary path on the Ares web server used when uploading documents.

Proxies

ProxyDefaultControls the default value of the proxy checkbox for Web Page Link items.
ProxyPrefixYour proxy server prefix. This can only have one value and determines if items submitted with this prefix are automatically checked as proxy web links.
UseProxyDo you use proxy server which has a proxy prefix to access campus licensed documents? This key is used in combination with the ProxyPrefix.

RSS

RSSCourseItemsChannelDescriptionThis is the RSS Channel Description that shows under the title bar.
RSSCourseItemsChannelTitleThis is the RSS Channel Title that shows in bold at the top of the RSS feed page.
RSSCSSCSS URL to use when displaying an RSS file
RSSDocsDocs value in an RSS file
RSSMaxNewItemsMaximum Number of Items that show in New Course Items RSS Feeds

Settings

AllowPublicItemSearchThis key must be set to Yes if you want to allow users who are not logged into the system to search amongst your Reserve Items.
DisplayStatuses TableThe OpenURLMapping table consists of the following columns: ID, Item Status, Web Display Status
HotListNameThe name for the hot list students can use on the web interface (e.g. Hot List, My Favorite Items, etc.).
PasswordResetMinutesNumber of minutes before a password reset URL becomes invalid
StatusDoNotAllowDeleteComma separated list of statuses to not allow instructors to delete their items.
UseHotListToggles whether you wish to use the hot list on the web interface.
WebLogoutURLHTML file or URL to be displayed when logging out of the Ares web interface.
WebRedirectProtocolAres will occasionally utilize web redirects internally. If you are using an SSL certificate, set the value of this key to HTTPS so that users will not be affected in the event of a redirect.
WebServerWeb server DNS name or IP
WebServiceURLThe URL for the Ares Web Service
WebSessionMinutesNumber of minutes before a user's web session expires.
WebUsePasswordHintDo you want to supply users with a password hint if they enter an invalid password?

User Clearance

AutoClearStatusesUser statuses that will not need to be cleared by staff. Statuses should be comma delimited. If you want to auto-clear all non-faculty statuses, set the key to 'NonFaculty'.  If you want to auto-clear all users, including faculty, set the key to 'All'.
ClearCustomerInstructorStatusesComma separated list of statuses that default to having instructor privileges.

User Modification Options

WebUserCanChangeFirstNameCan users change their first name on the Change User Information page?
WebUserCanChangeLastNameCan users change their last name on the Change User Information page?
WebUserCanChangeLibraryIDCan users change their LibraryID on the Change User Information page?
WebUserCanChangeStatusCan users change their status on the Change User Information page?

Validation

WebValidation Table

The Ares web pages have some form fields that are marked by default as "required." The WebValidation table, accessible under Web | Validation, stores the fields that you require your users to populate.

Web Status Lines

Alerts

SLAlertDeletedStatus Line that is displayed when a user deletes an alert.

Courses

SLChangeCourseInfoSucceededStatus line that is displayed when an instructor edits a course.
SLCourseAuthorizationRequiredStatus Line that is displayed when a user not on the list of authorized users for a course attempts to sign up via the web interface.
SLCourseSubscribeStatus line that is displayed when a user successfully subscribes to a course's email alerts.
SLCourseUnsubscribeStatus line that is displayed when a user successfully unsubscribes from a course's email alerts.
SLCreateCourseErrorStatus Line that is displayed when an error occurs while creating a new course
SLCrossListErrorStatus line that is displayed when an error occurs on the cross listing page
SLDeniedCourseIDStatus line that is shown when a user is not associated with a course when attempting to view course information, course tags, remove a course user, build the course spreadsheet (when not an instructor).
SLInstructorCourseAddStatus line that is displayed when an instructor successfully adds a new course.
SLInstructorCourseCloneStatus line that is displayed when an instructor successfully adds a new course via cloning.
SLInstructorCoursePermissionDeniedStatus Line that is displayed when a user tries to perform an instructor-related function to a course without proper permissions.
SLInstructorDeleteCourseStatus line that is displayed when an instructor deletes a course.
SLInstructorNoAvailableCoursesStatus line that is displayed when an instructor attempts to add an OpenURL link but has no available courses.

File Uploads

SLChooseUploadFileStatus line that is displayed when an instructor adds a new item which they will upload to the system
SLFileUploadFailureStatus line that is displayed when an error is encountered during a file upload.
SLFileUploadPermissionErrorStatus line that is displayed when a user attempts to upload an item into a course they do not have access to.
SLFileUploadSuccessStatus line that is displayed when a file is successfully uploaded to the system.

Home

SLMainMenuStatus Line that is shown on the Main Menu.

Items

SLDeniedItemIDStatus line that is shown when a user is not authorized to view an item or item information (not associated with the course), or when not associated with the course trying to export RIS information. 
SLFileIDNotFoundStatus line that is displayed when a file requested using a permanent link cannot be found.
SLHotListItemAddStatus line that is displayed when a user successfully adds items to their Hot List.
SLHotListItemRemoveStatus line that is displayed when a user successfully deletes items from their Hot List.
SLImportItemsStatus line that is displayed when an instructor imports items from a previous course.
SLInstructorDeleteItemStatus line that is displayed when an instructor deletes an item.
SLInstructorSubmitItemSuccessStatus Line when an Item is successfully submitted to Ares.
SLInvalidFileIDStatus Line that is displayed when a user tries to access an invalid file
SLInvalidItemDeleteStatusStatus line that is displayed when an instructor attempts to delete an item that is in a "Do Not Touch" status.
SLInvalidItemEditStatusStatus line that is displayed when an instructor attempts to modify an item that is in a "Do Not Touch" status.
SLInvalidItemIDStatus Line that is displayed when a user tries to access an invalid item
SLItemModifiedStatus line that is displayed when an item has been changed successfully.
SLItemNotAvailableStatus line that is shown when a user is authorized to view an item but it is not yet available.
SLItemPLinkNotFoundStatus line that is displayed when an item URL requested using a permanent link cannot be found.

Logon

SLLogonStatus line that is displayed when a user accesses the dll without a web session.
SLSessionTimeOutStatus line that is displayed when a user's web session has expired.

Passwords

SLPasswordChangedStatus line that is displayed when a user successfully changes their password.
SLPasswordHintStatus line that precedes the User's password hint when they enter an invalid password.
SLPasswordIncorrectStatus line that is displayed when a user enters an invalid password.
SLResetPasswordAuthTypeInvalidStatus line that is displayed when a user tries to reset their password if they do not use Ares authentication.

SharedLists

SLApplySharedListStatus Line that is displayed when a shared list is applied to a course.
SLChangeSharedListInfoSucceededStatus line that is displayed when an instructor edits a shared list.
SLCreateSharedListErrorStatus line that is displayed when an error occurs while creating a new shared list.
SLDeniedSharedListIDStatus line that is displayed when a user attempts to view an Instructor shared list for which they are not either the instructor or a full proxy for the instructor.
SLDisassociateSharedListStatus Line that is displayed when a shared list has been disassociated from a course.
SLInstructorDeleteSharedListStatus line that is displayed when an instructor deletes a shared list.
SLInstructorDeleteSharedListItemStatus line that is displayed when an instructor deletes a shared list item.
SLInstructorSharedListAddStatus line that is displayed when an instructor successfully adds a new shared list.
SLInstructorSharedListPermissionDeniedStatus line that is displayed when a user tries to perform an instructor-related function to a shared list without proper permissions.
SLInvalidSharedListIDStatus line that is displayed when the shared list ID is invalid.

Users

SLAuthServerFailureStatus Line that is displayed when there is an error connecting to the Authentication server
SLChangeUserInfoErrorsStatus Line that is shown on the Main Menu.
SLChangeUserInfoSucceededStatus Line that is shown on the Main Menu.
SLChangeUserOpenStatus line that is displayed when a user is changing their user information.
SLInvalidCourseProxyUsernameStatus Line that is displayed when an invalid username is submitted to be a course proxy.
SLInvalidFullProxyUsernameStatus Line that is displayed when an invalid username is submitted to be a full proxy.
SLLibraryIDInUseStatus line that is displayed if a new user attempts to register with a library id already being used by another user.
SLRegistrationErrorsStatus Line that is displayed when a user cancels the Ares registration process.
SLUserBlockedStatus line that is displayed when a user has been blocked from using Ares.
SLUsernameInUseStatus Line that is displayed when a user tries to register a username that is already in the Ares database.
SLUsernameNotInDatabaseStatus Line that is displayed when a user enters a username that is not in the Ares database.